Make sure your home is covered for consistent comfort by getting our attic insulation services in Kansas City.
We understand that many homes in our area are not equipped with attic insulation. This is unfortunate because heat rises and travels up through your ceiling and out any leaks or gaps in your attic. So it’s the best room in your home for exploring energy savings.
On average, our customers lowered their home energy bills by 30% last year just by upgrading their attic insulation. The attic is the easiest place to add insulation to improve your comfort and the energy efficiency of your home and it’s not expensive.
Let A+ Insulation add insulation to your attic and save you money.
Does Your Attic Have Enough Insulation?
Just how much insulation you need depends on where you are located. The nice thing about attic insulation is that it’s easy to tell if you have enough. The recommended level for attic insulation in Kansas City, Overland Park, and the entire KC metro is to be properly insulated to a minimum of R-49. That comes out to about 18.5 inches deep, depending on the insulation product.
Check to see that the insulation is evenly distributed and there are no low spots. Make sure the insulation goes all the way to the eaves.
Inspect your insulation levels. Any insulation at or below the attic floor joists is a telltale sign that you need to replace your attic insulation.
Why Leave the Job Up to a Contractor?
Attic insulation is a big job, especially if you’ve got a big space or too small a space that accessibility becomes a problem. Aside from the scale of this home improvement project, your attic may have certain conditions that call for professional attic insulation in Kansas City. These include:
- A leaky roof
- Rotted attic rafters
- Minimal to no attic ventilation
- Old wiring creating a fire hazard
Our experienced insulation professionals will carry out diligent, efficient work. We make sure the job is done on time, on budget, and up to building code so your family can enjoy consistent temperatures at home.
With over 15 years of outstanding attic insulation services, A+ Installation can save you money and keep you in comfort. By using our attic insulation installation last year our customers saved up to 30% on their energy bills. Our dedicated service is committed to ensuring our customer’s attic insulation cost savings by preventing heat from escaping from any leaks or gaps in your home.
Where Are The Attic Insulation Installers Near Me?
We understand how important it is to make your house energy efficient to reduce heating and cooling costs in Kansas City. We advise ensuring attic insulation cost savings by checking for even insulation in your attic, with no low spots or gaps present. As attic insulation contractors, we advise a minimum of 18.5 inches of installation depending on the insulation product.
Why worry about installing attic insulation yourself when you can call our team of friendly experts and let us take the stress out of the experience? Avoid searching for more attic insulation installers in the KC Metro and we’ll be able to provide you with the insulation advice you need.
Call A+ Installation For Expert Advice On Safety In Your Home
Enlisting professional services for attic insulation installation is essential as we identify leaky roofs, rotted attic rafters, poor ventilation and fire hazards like old wiring. Our expert attic insulation contractors will offer you tailored feedback on how to keep you and your family safe by identifying these hazards for you. We want to take the stress out of your attic insulation Kansas City concerns.
Our Unparalleled Services Ensure Attic Insulation Energy Cost Savings in Kansas City
Our professional attic insulation contractors install two types of insulation to ensure your attic insulation cost savings. Batt insulation or blanket insulation is made of fiberglass and attached to a vapor-barrier facing material. This extremely affordable insulation is best for areas without extensive pipes and wires to avoid cutting.
We Install Loose-Fill and Batt Insulation in Attics
Loose-fill insulation is also known as blown-in insulation and is installed using a blowing machine. This is also made of fiberglass.
We offer the following loose-fill services in Kansas City:
- InsulSafe SP – used in attics, floors and walls, this fiberglass blown-in insulation ensures thermal efficiency, great coverage, fire safety, sound absorption, and little settling. Perfect for attic insulation cost savings.
- Cellulose Insulation – more flexible than batt insulation, this blown-in insulation acts as a liquid and moves around obstructions to fill any gaps and provide high energy efficiency.
- Spray Foam Insulation – expanding up to 100 times its initial size, this insulation fills every space and doesn’t settle or sag. We offer spray foam attic insulation installation for commercial and residential property across Kansas City.
Look no further when searching for attic insulation installers in Kansas City! Let our friendly and expert team of attic insulation contractors carry out a no-obligation energy evaluation in Kansas City.
Call us at (913) 281-2250 today to get started, or download our Free Comparison of Window Replacement vs. Insulation below.
We Offer a Variety of Solutions For Attic Insulation:
InsulSafe SP is a fiberglass blown-in insulation used in both attics and walls. Besides thermal efficiency, it has many other benefits including great coverage, sound absorption, very little settling, and is also noncombustible. It is designed for pneumatic installation in open (attic) and closed (sidewalls/floor) construction cavities. It can be used in both new construction and in existing structures.
Cellulose insulation is another blown-in type of insulation. It acts similar to a liquid when it is applied, wrapping itself around obstructions and filling nooks and crannies that batt insulation can’t. It creates a virtual blanket around the inside of your home providing superior thermal efficiency.
CertaSpray closed-cell foam insulation is a spray foam insulation that expands up to 100 times its original size to fill every little space. It is an all-in-one insulation and air sealing system. Once applied, it doesn’t settle or sag. A+ Insulation offers spray foam insulation for commercial and residential properties throughout the Kansas City area.
Batt insulation is one of the most affordable types of insulation for attics and walls. It is effective and affordable, but it is better for areas without a lot of pipes, wires, or other obstructions. These obstructions in the wall require cutting the insulation to fit around them.
This can cause gaps in the insulation which negatively affect its ability to insulate the surface from the air. We are licensed and insured and prepared to take on any insulation job in Kansas City.