Monthly Archives: August 2018

Want to Save Money on Energy Bills? Make Your Attic More Energy Efficient

Improving your attic’s energy efficiency goes beyond helping you maintain a comfortable temperature in your home. It can also save you money on cooling and heating costs. If you’re looking to cut down your energy bill, take note of these suggestions to make your attic more energy efficient.

Seal Cracks to Reduce Air Leaks in the Attic

Foam sprayAttic air leaks are holes, cracks, and other weak points where air can go in and out of your house. Ignoring this problem can promote the escape of cool air during the summer and heated air in the winter. This forces your HVAC unit to work harder, which increases your energy bill. On top of that, leaks in the attic may serve as starting points for significant water damage.

If you come across a leak in your attic, seal them as soon as possible. You’ll usually find leaks in the following areas:

  • Attic Hatch
  • Doors and Windows
  • Duct Chaseways or Furnace Flue
  • Recessed Light
  • Open Soffit
  • Plumbing Vents
  • Wiring Holes

If you’re still having difficulty finding attic leaks, check out the floor plan of your home and use it to locate possible air leak spots.

Install Attic Fans

Attic ventilation fans are an excellent choice for regulating the temperature of your house. They cool a hot attic by drawing hot air out of the area and bring colder air from the gable and soffit vents. If you’re going to install these fans, make sure that your attic does not have any leaks. If your attic has holes, these fans could draw conditioned air out of your house.

Ventilate the Attic

A house attic with insulationVenting the attic helps regulate seasonal temperatures inside the attic while letting you maintain a consistent temperature in your home with the help of your HVAC system. A properly ventilated attic enables outdoor air flow into the attic during winter. While it may look strange to allow cold air to enter your house in the winter, a cold attic can minimize the risk of melting the snow on the roof. Melted snow could refreeze in gutter systems, damage the roof, and result in interior water damage.

Additionally, a well-ventilated attic provides an escape route for warm air. When hot air stays in the attic, it can heat the roof shingles and raise the risk of roof damage. On top of that, trapped humid and hot air could cause the accumulation of moisture and result in the growth of mildew or mold.

Make Sure Your Attic Has Sufficient Insulation

Insulation is one of the best ways to enhance the energy efficiency of your attic. According to the U.S. Department of Energy, insulation can help you save up to 20 percent on your home’s cooling and heating costs. If your attic is in need of insulation, don’t hesitate to turn to A+ Insulation. We have experienced insulation professionals who perform efficient and diligent attic insulation work. Count on us to do the job correctly and on time. We want you and your family to enjoy lower utility bills and a comfortable and consistent temperature inside your home.

Contact us today.

Batt or Blown-in: Which Type of Insulation Suits Your Home?

Insulation brings year-round comfort and lowers your energy bills. If you haven’t insulated your home yet, you can start with your attic, the easiest place to add insulation. But first, you have to figure out which type best suits your home and your budget.

Our budget-friendly attic insulation services in Kansas include batt insulation and blown-in insulation. These are two of the best options, and here’s how they differ from one another.

What’s the Difference?

Batt Insulation in Walls PictureBatt insulation comes in the forms of batts or rolls made of flexible fibers or what we commonly know as fiberglass. The latter is the most common insulation material, made from tiny pieces of glass fiber.

This type of insulation works best for areas with open or little spaces for insulation, like the space between wall studs, joists, and beams. A great example of these is cathedral ceilings.

Blown-in insulation, however, refers to the process of covering attic floors, or filling stud or joist activities, with any loose material with good insulating R-value.

Irregularly shaped spaces like attics work well with blown-in insulation. It can fit around the existing features of your home. It will only take an hour or two for a specialist like ours to blow a thick blanket of loose insulation across the space with a hose running up through the attic hatch.

Installation Costs and Insulation R-Values

The cost of installing batt insulation depends on your home’s location, the required amount of labor, plus the ancillary supplies. A standard insulation project needs almost 535 square feet of insulation. The cost averages about $145 to $200. The cost of labor for a complete installation averages between $170 to $420, including supplies, like fasteners, cutters, and tape.

The cost of batt insulation begins at around $0.12 to $0.16 per square foot. You need this much for a three-and-a-half-inch barrier of the said insulation that provides a value of R-11.

For blown-in insulation, it typically costs about $874 to $1,892. Adding insulation for 1,000 square feet of attic space will need materials costing up to $500 to $1,000.

For this type of insulation, every inch of loose fill cellulose provides a value of R-3.2 to 3.8. Loose fill fiberglass, on the other hand, has an R-value of R-2.2 to 2.7 per inch.

The benefits of both types of insulation are enough to help lower your energy costs. If you’re still uncertain about which type of insulation to install, you can ask us for guidance. Our team of experts can help you decide which insulation best fits your attic.

Attic Insulation by the Pros

A+ Insulation specializes in insulation. We’ve lowered the energy bills of more than 10,000 satisfied customers.  We’ve gained so many loyal customers over the years because we make sure to deliver the best experience possible, from evaluation to installation to price.

Our team has the training and certification, ensuring we provide the highest standards in every installation. Leave the job up to us and experience the diligent, efficient work of our insulation professionals.

Contact us today and schedule an appointment.

Building a New Home? Install Insulation for Energy Efficiency

Building a new home can be a rewarding experience. You want to get the most for your money while building a comfortable for you and your family. One way to do so is to install the right insulation for more energy efficiency. Most professional insulation contractors recommend installing spray foam to get the most return on your investment. Spray foam minimizes air leaks in walls and roofs, saving you around 15 percent on heating and cooling costs.

Insulation and Energy Efficiency in Your New Home

The U.S. Department of Energy explains that installing insulation while building your home rather than after the construction is more cost-efficient. Before you start incorporating insulation into your new home, you need to identify the areas that need the most air control first.

Remember that each area of your home has recommended R-values. These values will depend on the climate of your area as well as the type of heating and cooling system you use.

The Department of Energy also recommends installing your insulation after air sealing your home to ensure that unwanted moisture doesn’t get trapped in your insulation.

Where Should You Install Your Insulation?

It’s important to install your insulation in the right place to fully reap the benefits it has to offer. You should determine which areas tend to lose heat.

The attic is one of the key areas to add insulation in your home. Attic insulation will help attic-insulationyou effectively save on your energy bills because this is where your home loses most of its heat. Properly installing insulation in your attic will prevent this from happening and keep your home warm during colder months of the year.

Spray foam insulation is ideal for preventing air leaks in the roof and other cracks, as well. The fact that spray foam expands enables the material to effectively fill in cracks in ceilings, walls, and other areas of the home that might be hard to find.

Work with Professionals

Professional insulation contractors will know what material is best for your home’s heating and cooling needs. Experienced contractors also know how to work quickly and safely with this material. We cannot stress how important it is to work with a contractor who has knowledge of building an energy-efficient home and knows how to install insulation correctly.

It‘s also worth noting that professionals know how to get you the most for your money when it comes to insulation and energy efficiency. They know what to consider when it comes to ventilation and air infiltration; they will make sure your home is comfortable year round. Every home is unique and has different requirements when it comes to installing insulation.

You’ll have a peace of mind while working with our team of experts. We have project managers on-site who can explain the entire process to you from beginning to end and consider your personal concerns relating to your new home’s insulation

We offer free inspections to see which areas of your home need insulation the most. Contact us today for more information.