Category Archives: Residential

Pre-Season Prep: Getting Your Home Ready for a Hot Summer

A+-insulation-kansas-city-attic-insulationSummer in Kansas City officially starts with the Memorial Day weekend, ushering a season of huge, yearly blowouts with Celebration at the Station. Summertime can also get hot in the city. Meteorologists pointed out that the hottest period for the city historically happens from July 15 through July 30, with an average high of 89 degrees Fahrenheit. The temperature can go higher than that, though. The highest ever recorded in Kansas City, in fact, was on August 14, 1936, with 113 degrees Fahrenheit.

During warm temperatures, homeowners should take steps to keep their house stay cool without skyrocketing their energy bill. Here’s how you can get your home ready for the season’s heat:

Paint Your Roof White

Steven Chu, a Nobel prize-winning scientist and former U.S. Secretary of Energy, proposed painting the roofs white. He believed that doing so would be like getting rid of every vehicle from Earth for 11 years. Additionally, homeowners can expect their utility bills to drop when they have a white roof. Light colors, such as white, bounce both heat and light back into space rather than into the attic of the house.

Install a Programmable Thermostat

These useful devices enable you to set temperature controls for energy efficiency and maximum comfort. You can keep your utility costs low by maintaining temperatures higher when no one is at home.

Practice Smart Landscaping

Use your green thumb to strategically plant leafy trees and shrubs near the windows of your house. This is a great way to stop those same windows from shifting excess heat into your home.

Upgrade Your Windows

Windows that are energy efficient can make all the difference. If replacement is not in your budget or your windows are too new, you can reduce solar heat gain by installing low E film.

Clean the Coils of Your Refrigerator

Refrigerators, when they’re not operating at an adequate level, can cause high energy usage. If you want to enjoy the best performance for your appliance, clean up the unit’s condensing coils.

Install Ceiling Fans

These fans pull warm air up against the ceiling and push it down against the walls. It simulates a chilled breeze inside your house. If you want this wind-chill effect to work, make sure your ceiling fans are turning in a counter-clockwise rotation.

Update the Insulation of Your Home

Pay attention to your attic and the levels between the unconditioned and conditioned spaces of your house. You can add extra insulation in this part of your house to stop cold air from escaping.

Following these steps will help keep your house cool during summertime and avoid incurring high energy costs. When it comes to insulating your house, A+ insulation is ready to help you in this area. We add insulation to maintain the desired temperature in all parts of your home. The insulation we install holds in heat during the winter and prevents cold air generated by the AC from escaping during the summer. Rest assured we’ll arrive on schedule and work efficiently and diligently to complete your insulation project to your satisfaction.

Get in touch with us today to schedule an appointment.

Insulate Your Basement and Decrease Your Energy Bill

Effective insulation can significantly drive down your energy bills. This is especially true during the winter when heating systems have to work overtime to warm up a room. If you insulate your basement you can start enjoying the benefits of a warm home and lower energy bills.

Basement Insulation: How It Drives Down Your Energy Expenditures


You may overlook your basement as a place to add insulation. This is normally not an area you’ll focus on when investing in home improvement projects. But the basement shouldn’t just be an afterthought. It can help you achieve large amounts of energy savings, perhaps even more than other spaces in your home can.

What are the Benefits of Insulation?

Ideally, an insulation system provides both immediate and long-term benefits. General benefits include reducing energy costs, preventing moisture condensation, and providing fire protection.

A house without proper insulation is prone to the leakage of air. Gaps surrounding windows and doors result in high amounts of energy expenditure as air leaks out of a room or a house. Heating systems end up working much harder to maintain a consistent level of temperature. More energy is used the more these systems have to run.

What Part Should You Insulate?

Before you decide on the area of your basement you want to insulate, consider your intentions for the space. If you’re using it as a living space, it may be best to insulate the walls. On the other hand, if insulation is only meant is to reduce heat loss and energy costs, insulate the basement ceilings instead.

Also, keep in mind that insulation reduces the amount of usable interior space. Depending on the type of insulation you choose, insulation placement can take up a few inches of space.

Basement Walls

Providing insulation to the walls of your basement is often more effective at keeping warmth in. You can save hundreds of dollars in energy use this way. In addition, you can turn the space into a more comfortable and habitable living area you can use on a daily basis.

Basement Ceilings

Is it a good idea to insulate your basement ceiling? There are some concerns about insulating this area because it opens the possibility of lowering temperature even more and causing problems like frozen pipes. However, they are cheaper than wall insulation and can eliminate air leak issues.

What are Some Types of Insulation?

  • Blanket (Batt and Roll) – Blanket insulation is an inexpensive method of insulation. It involves inserting materials like fiberglass, mineral, and fibers into studs and beams in walls and ceilings.
  • Sprayed Foam Insulation – This type of insulation carries a high R-value. This refers to the ability of the material to resist the flow of heat. Sprayed foam insulation has a liquid application. It eventually expands and fills empty gaps throughout the walls or ceilings.

Don’t leave insulation to the last minute. Temperatures will drop as winter approaches, and your energy expenditure may skyrocket as a result. The earlier you insulate your basement or other rooms in your house, the fewer problems you will have later on.

A+ Insulation Kansas City provides solutions if you decide to insulate your basement for the winter. Insulation services can go a long way in reducing your energy expenditures and ensuring you stay warm and comfortable in your home no matter the time of year.

Contact us at 913-281-2250 or 816-265-1947 for a free inspection and estimate.

Why Blow-in-Blanket is an Efficient Insulation Alternative?

Batts and blankets are the most popular types of insulation. They are ideal for do-it-yourself projects because they are easy to transport and carry. But this insulation has limitations, like losing effectiveness as it compresses easily. That’s why using blow-in-blanket system (BIBS) for your Kansas City home can be an ideal option.

Blow-in-Blanket Insulation: An Efficient Alternative for Your Home

Switching to BIBS can boost your home’s R-value. R-value refers to how well the material resists the flow of heat, measuring thermal resistance by unit; the higher the R-value, the more effective the insulating material.

Outstanding Thermal Performanceblow-in-blanket-insulation

When it comes to insulating your home, BIBS provides several benefits. You can use this type of insulation to different parts of your home, including walls and attic. This system is also easy to apply and fills the spaces completely to give your home superior thermal performance. You don’t need to worry about the heat escaping your home because blow-in insulation can fit in small gaps, too.

Unlike foam spray, installing BIBS is less messy. The installation can take up an hour or two. It’s also fire resistant to keep your home safe. Additionally, this system won’t encourage mold and mildew buildup. It also doesn’t attract insects and rodents.

Using blow-in insulation in your home is a rewarding investment because it can last throughout the lifespan of your home. You don’t need to spend more cash on repairs and higher energy bill caused by the heat that escapes your home.

How Much Does an Average Blow-in-Blanket Insulation Cost?

The insulation cost varies depending on the size of the area you’re insulating and the material you’re using. If you’re insulating the attic of a 1,200 square foot home, the average price for a blow-in insulation job is $1,850, excluding the cost of removing any old insulation.

Adequate insulation can help you save money. You can save an average of 10 to 50 percent on utility bills based on the efficiency of your insulation and the R-value of your insulation.
You should determine the right R-value for your home to help you find the right insulation. The recommended R-value rating can differ based on your climate, the part of the house you’re planning to insulate, and the type of heating system you use.

Determining if It Fits Your Home

Knowing the recommended R-value rating for your home can help you determine if BIBS the right choice. Blow-in insulation usually has R-values of R-2.2 to R-3.8, depending on the type loose fit insulation you’re planning to use.

You may also do an energy audit to identify the areas you need to prioritize in improving efficiency. Hire a professional for an accurate assessment and installation of blow-in insulation.

At A+ insulation, we can help insulate your home using BIBS. Our team of Blow-In-Blanket Contractors Association (BIBCA) certified professionals can install environmentally friendly, custom fit blow-in-blanket insulation to your home using specially manufactured fiberglass. This material has no chemical smell and never corrodes pipes and never settles.
Insulation is effective only when installed properly. At A+ Insulation, we have the training and experience to install any type of insulation correctly.

Contact us today for a free no-obligation energy inspection.

How R-Value Affects Your Insulation Choice

Your money can “escape” through the holes in your attic. These holes could be the culprit behind your energy bill increases, especially during winter. A certain amount of heat leaves your home through these holes, which forces your heating system to work harder to sufficiently warm up your home.

Finding the Right Attic Insulation Based on R-Value

Consider conducting an energy audit to determine whether you need to fill in some gaps or if it’s time to replace your existing insulation. There are different ways to insulate your home in Kansas City, from spray foam insulation to blow-in-blanket.

But before you change your attic insulation, you need to understand the right R-value that will suit your home.

R-Value Determines Insulation Effectiveness

Generally, R-value refers to an insulating material’s resistance to heat flow. The Department of Energy (DE) explains that insulation with a higher R-value can be more effective. It adds that the effectiveness of some insulations may depend on aging, temperature, and moisture accumulation.

You can adjust the R-value of your insulation by adding more layers of the insulating material. The results may vary, however. For example, the R-value of loose-fill insulation may not increase even if the installed thickness increases. Unlike other insulations, loose-fill ones undergo compression under its own weight.

The recommended rating depends on your climate and type of heating and cooling system. Your attic insulation should have an R-value of R-30 to R-49. If your area has a colder climate, it may go up to R-60.

Attic Insulations Have Different R-Valuesr-value-attic-insulation

Insulations come in different forms and each of them provides different R-value ratings. This can help you find the right insulation for your attic to keep your home warm during winter and cool during summer. The types of insulations include the following:

Spray foam

  • Open-Cell polyurethane (R-value: 3.5 to 3.6 per inch)
  • Closed-cell polyurethane (R-value: 6.0 to 6.5 per inch)

Batts and Blankets

  • Fiberglass (R-value: 3.0 to 4.0 per inch)
  • Rockwool (R-value: 4 to 5 per inch)
  • Cotton (R-value: 3.5 to 4 per inch)

Loose-fill Insulation

  • Fiberglass (R-value: 2.2 to 2.7 per inch)
  • Cellulose (R-value 3.2 to 3.8 per inch)

Structural Insulated Panels (SIPs)

  • Polystyrene (R-value: 3.8 expanded (EPS) to 5 extruded (XPS))
  • Polyisocyanurate (R-value 5.6 to 7.7 per inch)

Spray foam and SIPs offer higher R-values compared with other insulations. The former, however, can fill spaces completely. It expands to fill the whole cavity because it’s made of foam. It also stays in place for a long time.

Keeping Your Insulation Effective

There are insulations that you can install on your own, but in some cases, you will need a professional’s help. For instance, insulation professionals should install spray foam because they have the right equipment and expertise to do the job correctly. Properly installed insulation can be more effective, so you’ll get your money’s worth.

Here at A+ Insulation, our team can help you minimize your energy bill by providing your home with quality insulation solutions.

We provide two types of spray foam. First is the closed-cell foam, which decreases humidity and has better resistance to water. The other one is the open-cell foam, which can cover hard to reach areas the closed-cell foam can’t.

If you have more insulation-related questions, contact us today. We also offer free, no-obligation inspection of your home to identify the right insulation for your attic.

Increase Your Home’s Value With 3 Insulation Projects

Upgrades, repairs, and maintenance are important responsibilities for any homeowner. You spend time, money, and effort on improving your property and for some, performing these improvements may be for the sole purpose of having a beautiful, comfortable home. Some homeowners, on the other hand, view home improvements as a way to increase the value of their property.home-value

While visible improvements are all well and good, there may be an unseen, upgrade that requires your attention: energy efficiency. Homes that boast energy efficiency are highly sought after because more and more people are making a conscious effort to help preserve the Earth and its resources.

What’s great about energy-efficient home improvements is that they aren’t very costly to make and give a high return on investment if you ever decide to sell your home.

3 Insulation Projects That Can Increase Your Home’s Value

One of the easiest and most practical improvements you can add to your home is insulation. Here are three home insulation projects you may want to consider:

1. Attic Insulation

Remodeling Magazine annually publishes its Cost vs. Value report, which compares the cost of remodeling projects with the value those projects retain at resale. For two consecutive years (2016 and 2017), adding fiberglass attic insulation topped the list, with cost recouped at 116 percent in 2016 and 107 percent in 2017.

It’s ideal to get fiberglass insulation, particularly blow-in-blanket insulation to protect your Kansas City home against extreme weather conditions. About 25 percent of your home’s heat escapes through the roof if it’s uninsulated, so you spend more energy heating your house. When your attic is insulated, not only will you keep the heat in and the cold out, you’ll also save on your heating bills.

2. Basement Insulation

Basements are often utilized as a storage space and can often be forgotten about. Basements are also known to be a space of moisture intrusion. That’s because this area of your home isn’t often insulated.

Insulating your basement will provide you with a dry and cozy living space. Instead of using it as a dumping ground for old and unused supplies, you can turn your basement into a bedroom, home theater, or cozy living room. What’s more, an added room adds value to your property.

3. Wall Insulation

Newer homes are almost always built with insulated walls. But if you’re living in a property built before the 1970s or 1980s,  your walls may not be insulated. This is because building codes, which vary by state, didn’t start requiring a higher R-value until 1970.

Closed walls that aren’t insulated can lead to discomfort for the occupants of the house, especially during harsh weather conditions. This is why you should retrofit wall insulation. Like your ceiling, uninsulated walls let out a lot of heat, so adding insulation will keep temperatures inside the home comfortable no matter what the weather is like.

Home improvements like insulation add to your home’s value and make for more comfortable living – an important factor for when you’re selling your house to potential buyers.

If you would like to start increasing your home’s value by installing high-quality insulation, contact our team at A+ Insulation. We will use the latest techniques and years of experience to determine where exactly you should install insulation in your home.

Attic Insulation: A Way to Reduce Heating Bills in Winter

As the temperature drops this winter, your heating bill may rise. According to the Energy Information Administration (EIA), the prices of residential heating oil and propane for the winter heating season this year are 23 percent higher, respectively, compared to the start of the previous cold weather season.

How to Lower Your Heating Bills This Winter

Making your home energy-efficient during winter helps you reduce your heating expenses. One way to do this is by upgrading the attic insulation of your Kansas home.

Keep the Cold Out


Although wall insulation for your entire home is ideal, it may be too large of a project to take on at the moment. While attic insulation could also be invasive in some cases, it is a more cost-effective and quicker way to keep your home warm.  For starters, it can act as a “lid” on your entire home, keeping you comfortable as heat migrates upward.

When the heat rises, it travels up through your ceiling and escapes through any gaps in your attic.

This results in higher energy bills because your heating system has to work harder to produce enough heat to make you comfortable, which is wasteful.

This type of project may reduce your expenses on natural gas and heating oil by 30 percent. Rather than spending about $1,646 for heating oil and $595 for natural gas this winter, your total expenses may decrease to $1,152 for oil or $417 for gas.

You’re likely to earn a 107.7 percent return on investment (ROI) when you decide to sell your property. Experts say that buyers are willing to pay $1,446 more for a house with an insulated attic.

Choose the Right Insulation

When upgrading your attic insulation, choosing the right type of insulation is vital to effectively insulate your home. Batts and blankets are the most common types of insulation and come in convenient rolls; these are easy to transport and carry. This type of insulation is ideal for do-it-yourself projects.

But you still have to be careful when using this material. Improper installation can mean loss of thermal performance by as much as 50 percent.

Batts and blankets come in different variations, including:

  • Fiberglass – ideal for walls, floors, and ceilings
  • Rockwool – suitable for walls, floors, ceilings
  • Cotton – works well with the walls

Another type of insulation is loose-fill, which consists of fluffy strands of fiber. You have to use a special machine to blow these strands of fiber into your attic and walls. The two types of loose-fill insulation are:

  • Loose-fill fiberglass – suitable for ceilings
  • Loose-fill cellulose – this works well in hard-to-reach places, unfinished attic floors, ceilings, enclosed existing walls or open new wall cavities.

For superior energy savings, structural insulated panels (SIPs) are an ideal choice. SIPs can save 12 to 14 percent of energy, but they’re costly, as well. SIPs can either be polystyrene or polyisocyanurate, which are ideal for new walls, ceilings, roofs, and floors.

You may also opt for spray foam insulation, which has higher R-values than batt insulation. R-values refer to the resistance of a material against conductive heat flow. Higher R-values mean that the material provides more effective insulation for your home.

There are two types of spray foam insulation, open-cell polyurethane, and closed-cell polyurethane. Both of them can be used in walls and on floors and ceilings.

Let the Professionals Install Your Insulation

While you can install your own insulation, it’s better to call the professionals to the do job instead. Installing insulation requires a lot of work and you need to identify potential areas where heat can escape.

Insulation can also be hazardous to your health if not done properly. You could experience skin irritation and various respiratory diseases.

Our team of certified installation technicians uses the right equipment while following the right procedure to do the job right the first time around. We use safe and cost-effective methods to keep your home warm during winter, and comfortable all year long.

Contact us today for more information.

Stop Paying Too Much to Heat Your Home This Winter

The cool winter chill is here, and that means you will have to crank up your thermostat to keep your home warm. We all know that this means that the higher energy bills are starting to roll in. But don’t worry; at A+ Insulation, we can help you pay less for more heat this winter. Here’s what you need to do.

3 Ways to Pay Less for More Heat this Winter

1. Seal the Gaps

An overworked air conditioner can cause your energy bills to skyrocket because your home could have gaps in the attic, basement, or exterior walls.

When the temperature drops, hot air can escape through gaps, cracks, or any opening that is not sealed. When that cold air comes in, and the temperature goes down, you are forced to crank up the heat.

Make your house comfortable during the winter season by sealing any exposed gaps. Caulk or weather strip gaps and cracks around windows and doors to keep the cold air out. Your energy bills will drop by up to 20 percent once you take care of those gaps.

2. Get a Smart Thermostat

The average home spends over $2,000 every year on energy bills. Almost half of this amount comes from heating and cooling. You can resolve this by using a smart thermostat.
A programmable thermostat can help you manage the temperature in your home. This gadget allows you to set a schedule for the furnace. By controlling the temperature of your home from anywhere, you won’t waste energy by blasting the heat when no one is around.

The device optimizes your energy use to deliver savings without sacrificing comfort. You just have to program it depending on your family’s schedule.

You can expect significant savings when you stick to the settings or adjust them based on your family’s needs. By doing so, you can save at least $180 every year.

3. Go For Fiberglass Insulation


Without enough protection, the winter chill can seep through electrical outlets, around windows, and under doors. But fiberglass insulation can help keep the cold at bay when temperatures start to threaten your comfort.

This insulation has many features that can protect your home against extreme weather conditions. Add it to your walls and your attic floor, where most of the hot air escapes. You can save up to 30 percent on heating and cooling costs with fiberglass.

You can also go for the blow-in-blanket system (BIBS), which not only blows in and fills easily, but also lasts for a long time. Here are the benefits of BIBS insulation:BIBS-insulation

  • Safety: It’s fire resistant.
  • No settling: It won’t settle or corrode over time.
  • Better coverage: This insulation can fit in tiny crevices, like wall cracks sized to only a couple of inches.
  • Noise reduction: It can absorb outside noise.
  • Moisture-resistant: It can resist the growth of mildew or mold.
  • Insect- and rodent-resistant: Rodents or any kind of insect won’t use it to make a nest.

Of course, the thermal performance of any insulation system depends on the installation. We have insulation technicians who have the training and certification to ensure your family experiences comfort throughout the year.

Let our team of certified professionals improve the thermal performance of your home.
Click here to contact us today.

 How to Prepare Your Attic for Insulation This Winter

It’s that time of the year again, and the temperatures are definitely dropping. In 2017, the temperature dropped to -6° F in Kansas. You may already feel chill drifting into your home this year. If that is the case, it might be time to take a look at your attic.

Home Maintenance: Is Your Attic Ready for Winter?

Here’s how you can make sure your attic is well-insulated and prepared to brave the cold weather.

Don’t Let Critters Lounge in Your Attic

The attic is one of the most common problem areas for heat to escape from your home.

Before a professional begins insulating your attic, clean it first. The cold weather outside will bring in squirrels and birds who are trying to find shelter in a cozy space. These creatures can cause a lot of damage to your attic by chewing through your insulation or wiring.

Make sure your attic doesn’t serve as a critter hotel this winter. Cover all holes, gaps, and spaces that might allow small animals to get in.

Protect Your Roof

Inspect your roof and see if it is in need of repair. Don’t wait for harsh weather conditions to return to see if your roof functions as it should. A problematic roof will affect your attic insulation.

Here are some of the things to look for when inspecting your roof:

  • Signs of leaks
  • Loss of granule on the roof
  • Missing shingles
  • Cracked shingles
  • Shingles that have buckled or curved

If you notice any of these signs, contact your local roofing company to fix these issues as soon as possible.

A Quick Energy Checkup is Necessaryinsulation-energy-check

An energy audit allows you to see patterns of usage that may be driving up your utility bills. Warmth amid cold weather isn’t the only thing you can get from attic insulation. With a properly insulated attic, you can have lower energy bills by as much as 50 percent. An energy audit will tell you which areas in your home require the most insulation to help reduce cost.

You have two ways to go about this:

  1. Hire an energy auditor or do the check on your own. A professional would have the tools to run exhaustive tests, such as a PFT air infiltration measurement technique and a thermographic scan. Think it’s expensive? Not when you hire us to do the checking. In Kansas City, we do free energy evaluations as part of our no-obligation inspections and estimates.
  2. You can go the DIY route. We will say that performing your own energy audit won’t be thorough, but it will at least you give an idea of which areas to focus on. You can check windows and electrical outlets for leaks and ceilings for gaps. You can also try to check your attic for the vapor barrier, which cuts the rate at which water vapor moves through the material.

Leave the Job to the Professionals

For consistent comfort, turn to A+ Insulation. Our certified, experienced technicians always go out of their way to make sure our customers are happy and comfortable in their home.

Contact us today and schedule an appointment.

Blow-in-Blanket Insulation: The Better Insulation Alternative?

You have a lot of home insulation options readily available to you these days. Your local insulation experts will throw out a couple of familiar terms like rolled, batt, and spray foam.

The BIBS System: A Better Insulation Option for Your Home?

While the options listed above popular, there’s another type of insulation you can consider: blow-in-blanket insulation systems (BIBS).

The Basics of BIBS

BIBS insulation in Kansas City is a type of insulation system that uses specially manufactured fiberglass blowing tools installed in the floors, walls, ceilings, and attics behind a proprietary fabric.

The system creates a seamless insulation blanket that fills the gaps around wires, pipes, and other objects to eliminate air gaps and voids. This thermal envelope has no settling either, maximizing comfort and increasing sound control.

It provides total coverage against humid air currents, as well as against harmful moisture.

With BIBS insulation, homeowners improve the structure’s overall thermal efficiency and durability.

Why BIBS is the Ideal Choice

As mentioned, this insulation system offers several benefits to residential homes, commercial properties, and industrial buildings. Consider the following advantages:

Higher Efficiency R-Values

This high-density insulation solution delivers higher R-values (or thermal resistance) compared to traditional insulation alternatives. Its high R-value guarantees greater insulating effectiveness, which promotes maximum comfort in your home or commercial establishment.


Blown-in-blanket insulation doesn’t settle. Insulation experts place only a measured amount of dense-pack fiberglass blowing wool behind a dust-free fabric. Workers that install the system properly eliminate the potential for settling.

Excellent Sound Control

BIBS systems fill the areas around your wires, pipes inside the wall or ceiling cavity. Without air gaps to carry in sound, homeowners can enjoy peace and quiet in any room of their home.

Fewer Allergens, Pests, and Pollutants

BIBS’ consistent density of fiberglass blowing wools reduces pathways for outdoor allergens, moisture, pests and pollutants, which improves comfort indoors.

An Energy-Efficient Option

With the rising concerns over global warming and increasing energy prices, energy-efficiency is now also a priority for today’s homeowners.

Fiberglass insulation is a proven energy-saving measure applied in most homes and commercial establishment. A number of traditional fiberglass applications, however, still leaves air gaps and settle, which leads to heat loss.

With blow-in-blanket insulation, this isn’t a problem. The BIBS system maximizes energy while saving you more money along the way. It uses glass fibers designed to deliver maximum performance with minimal weight. Because of the compressible and lightweight quality of its wool fiber, the BIBS system requires less energy and packaging to get to the construction site.

Improve the comfort of your home with blow-in-blanket insulation. This state-of-the-art insulation solution promotes better thermal efficiency without compromising yours and the environment’s comfort.

When it comes to BIBS or other forms of insulation, count on A+ Insulation to do the job. Our BIBCA certified professionals will properly install your systems, as well as ensure the comfort of your home and the safety of your family.

Have one of our energy consultants evaluate if BIBS is right for your home. Get in touch with us today for a free no-obligation energy evaluation.

When to Replace the Insulation in Your Attic

Attic insulation is a vital component that helps with the energy efficiency of your home. It regulates moisture levels inside the house, helps block out noise, keeps hot air out during the summer, and keeps your home toasty and warm during cold weather.

Over time, the state of the insulation in your attic can deteriorate. This could lead to a range of problems, including higher utility costs and inconsistencies at room temperature.

Out with the Old: Signs Your Attic Insulation Needs Replacement

Here are some signs that you may need to replace the insulation in your attic:

Pest Infestation

A worn out or damaged attic insulation can serve as a cozy and nice home for mice and other pests. They may leave waste behind if they are using the old insulation as a nest. If you suspect insects or rodents living in your attic, consider having a professional pest inspection before you have any new insulation installed.

Poor Climate Controlold-attic-insulation

Insulation acts as the main barrier between the weather outside and the indoor temperature. If the insulation material is damaged, it may be hard to regulate the temperatures inside your home. If you’re having difficulty keeping the upper floors of your house warm in the winter and cool in the summer, you may have a problem with your attic insulation. On top of that, you may have an issue with your attic if you feel a draft, but are unsure of its source or origin.


When the insulation in your attic can no longer keep the heat in, it rises up and out, heating the roof and causing any snow to melt. Once temperatures drop, the extra water refreezes and formsicicles. You may need to overhaul your insulating material if you come across icicles during winter weather or notice frozen precipitation melting quickly on your roof.

Unusually High Energy Expenses

Maintaining the desired indoor temperature in your house requires more energy when you have warm or cool air coming into your house through the roof. If you want to regulate the temperature, your heater or air conditioning unit needs to keep running or work harder. This may lead to a high electricity bill.

Crumbling Insulation

An easy way to find out if your insulating material is way beyond its useful life is to wear an industrial glove and touch the insulation in your attic. If it crumbles, then it’s high time you replace it.

These signs should push you to consider getting the insulating material in your attic changed. Rather than do the insulation replacement yourself, let A+ Insulation handle the job. We offer reliable attic insulation services in Kansas City.

You can count on our experienced insulation professionals to carry out the work efficiently. They commit to completing the project on budget and on schedule. After all, we want you and your loved ones to enjoy a comfortable and consistent temperature throughout your home.

Get in touch with us today for your free, no-obligation inspection. We look forward to providing the A+ service you deserve.