Batt and rolls vs blown insulation is a common debate when completing this change to your property. Here are some of the key points you should consider.
Are you thinking about adding more insulation to your home? If so, then you have come to the right place. It can be quite tricky to know what type of insulation is going to be right for your property and there is a range of different choices to consider here.
One of the key decisions is whether you opt for blown-in or batt insulation. What’s the difference here?
Blown-In Insulation vs. Batts For Attic Installations
You have likely already heard about the benefits of fiberglass insulation. Blown-in and batts refer to two different types of fiberglass insulation that could be relevant to your home. Blown-in or loose-fill insulation and fiberglass batts. Blanket insulation that is made of rolls or batts is one of the more common choices but that doesn’t necessarily mean it’s the right one for your home.
Batt insulation is available and purchased in panels that are pre-cut. Usually, it will be installed in areas where there is a considerable amount of free space.
In other words, you should consider it for spaces where you don’t have to worry about wiring and pipes. It’s smooth and often reminds people of a thermal blanket. It can be installed in walls and is typically favored for new construction projects.
In contrast, blown-in insulation is installed with a blowing machine however depending on the material, the actual installation process can differ slightly.
Both can be installed in various areas of your home and they are typically used in the walls as well as attic insulation.
Is Blown-In Insulation Better Than Batts?
Some people argue that blown-in insulation is better than batts for a few reasons. First, it’s better at providing sound control in your home. So, if you want to make sure that the noise outside isn’t a nightmare or footsteps above you don’t sound like elephants wandering around, then blown-in insulation could be the right choice. It may even be the best type of insulation for the attic.
As well as this blown-in insulation can be more energy efficient. The reason for this is the process of how it is installed. Since it is installed using a blowing machine it spreads out through all of the available space.
Do be aware though that blown-in insulation will not be the best option for every home. As such, you should make sure that you are getting a professional to assess your home. They will be able to tell you exactly what insulation type is suitable, whether you are adding it to the exterior walls or your attic.
We hope this helps you understand which type of insulation could be the right fit for your home. If you need more help here, please do not hesitate to contact us and a friendly member of our team will be happy to assist you.
as the primary method of insulation in a new home or business, as well as supplemental insulation. Spray foam is applied by spraying a polyurethane foam into walls and ceilings, where it then expands to form an airtight seal that is also moisture tight and also protects your home or business from pests, rodents, and mold damage. One of the best attributes of spray foam insulation is its ability to seal off small crevices that other types of insulation simply cannot reach which makes it 
air bubbles and creating an insulating effect that escalates and slows the heat exchange between surfaces. 
Professional insulation services may seem expensive but attempting to DIY could be a massive mistake. This article explains why. 
No building codes for insulation minimums existed before 1980. With the many changes in the standards for insulation over the years, you still need to check your home’s insulation even if you had the property built after 1980. The standard insulation then may not meet the code today.
One of the things homeowners can do to save on expenses each month is to install insulation. Homeowners can hire general contractors to do this, but the results may not be as they desire.
A primary concern in padding insulation is determining and understanding the type of insulating material. Contractors who lack the qualifications to handle toxic insulation materials, such as asbestos, can cause homeowners and other occupants of the property to get sick. Thus, it is best to hire insulation contractors, as they are qualified to handle hazardous insulation materials.
No matter what the temperature is outdoors, you need to make sure that you obtain the same level of comfort indoors. Upgrading your 
Rest assured that your contractor will help you get to know the R-value of each insulation material. The climate in your area is the primary determinant of the material, but your contractor will also keep your preferred budget in mind when recommending insulation foam.
Old houses hold a nostalgic appeal for their architectural features unique to a bygone era. But the aesthetic could come at a cost: dated structures have a higher chance of containing harmful materials like asbestos.
Asbestos fibers can lurk in various corners of your home like floor tiles and water pipes. Sometimes, you might even find thousands of loose particles of asbestos inside walls or beneath attic floorboards. That’s why it helps to identify whether your 
One of the areas that homeowners want to be insulated in their home is the attic. Applying spray foam insulation in your attic helps residents save hundreds of dollars on their monthly energy bill and prevent long-term structural damage to moisture.
Homeowners sometimes overlook applying enough insulation on freshly built rooms or converted rooms. These new rooms may not have adequate insulation like the rest of the areas in your home. Using spray foam insulation in these rooms creates an effective air barrier that helps regulate temperature in your new space. Additionally, it keeps the temperature consistent with the rest of your house.
Many of us are familiar with the tale “Goldilocks and the Three Bears.” As the story goes, Goldilocks enters the cottage and tries out three bowls of porridge. One bowl was too hot and the other too cold. When Goldilocks tasted the third bowl, she remarked that the temperature is “just right.”
The next step is to become familiar with the climate of your city. The coldest periods of Kansas City, for instance, range from late November to early February. If you find your attic not producing adequate heat during the cold months, your insulation material probably has a low R-value, which delivers inadequate insulation. Take this time to find out the R-value appropriate for your climate.
Winter season is nearing—it’s that time of the year again when seeking warmth under a blanket and a mug of hot chocolate seems like a good idea to get comfortable. But if the insulation in your home is not fully functional, hot chocolate and blankets may not be enough to keep you warm.
While mold growth is not a big issue during the winter season,